禁止野外工作(基地伙伴使用你的设施)

禁止野外工作(基地伙伴使用你的设施)

基地帕鲁不再跑出基地砍伐野生树木和开采野生岩石,而是前往你建造的伐木场/采石场工作。可针对树木、岩石和陨石进行配置。

English | 简体中文(往下滑)| 繁體中文(往下滑)


No Wild Work (Base Pals Use Your Facilities)

Base Pals stop wandering off to chop wild trees and mine wild rocks inside your base and work at the Logging Sites / Stone Pits you built instead. Configurable for trees, rocks and meteorites.

Type: Server-side (install on the dedicated server or co-op host; players don't need it)

The problem

In the game's work priority, wild logging and mining come before facility logging and mining. Every time a base Pal picks a new job (after eating, resting, the hot spring...) it walks off to a wild tree or rock inside the base range instead of working at the facilities you built - and often gets stuck in the terrain doing so.

What this mod does

  • Uses the game's own "workable by base Pals" flag and turns it off for wild trees and wild rocks/ore/bone piles.
  • Base Pals then only take logging/mining jobs at facilities you built (Logging Site, Stone Pit, Ore mining sites...).
  • Players can still chop and mine everything by hand.
  • Meteorites are left on by default (they disappear after a while, so it's usually worth letting Pals mine them).
  • Only memory is changed - nothing is written to your save. Remove the mod and everything is vanilla again.

Requirements

  • UE4SS for Palworld (Okaetsu's RE-UE4SS Palworld build)

Installation

  1. Install UE4SS in the server folder (e.g. steamapps\common\PalServer, or the game folder of the co-op host).
  2. Extract the zip into that folder (it contains the full Pal\Binaries\Win64\ue4ss\Mods path).
  3. Restart the server.

Configuration

Edit ue4ss\Mods\NoWildWork\Scripts\config.lua:

  • Trees (default true) - Base Pals don't chop wild trees/logs.
  • Rocks (default true) - Base Pals don't mine wild stones, ore deposits and bone piles.
  • Meteors (default false) - Set true to also stop base Pals from mining meteorites.
  • LogWildAssignments (default false) - Log when a base Pal still gets assigned to wild work (for troubleshooting).

Notes

  • NOT for you if you want base Pals to mine the wild ore/stone deposits inside your base (e.g. a base built on an ore field). In that case set Rocks = false so only wild trees are left alone, or don't use this mod.
  • Nice side effect: the trees and rocks around your base stay as scenery instead of being cut down.
  • Screenshots: (1) a test base with only a Logging Site and one Pal allowed to do logging/handiwork/transport - it works at the Logging Site while the wild trees next to it are untouched. (2) a base on an ore field with one Pal allowed to mine and no Stone Pit - it stays idle and the wild ore deposits are left alone.
  • Install on the server only (or on the co-op host / single-player game). Players don't need it.
  • The setting applies to every base on the server.

Tested on Palworld Steam build 25246127 / Dedicated Server build 25247047 (November 2026).


简体中文

据点帕鲁不打野外树木、石头

据点帕鲁不再跑去砍据点范围内的野外树木、敲野外石头,改去你盖的伐木场、采石场工作。树木、石头、陨石可以分别设置。

**类型:**服务器端(装在专用服务器或多人房的房主;玩家不用装)

问题

游戏的工作优先级里,野外砍树、挖矿排在设施伐木、挖矿前面。据点帕鲁每次重新挑工作(吃完饭、休息完、泡完温泉),就会跑去打据点范围内的野外树木或石头,而不是去你盖的设施,还常常因此卡在地形里。

这个模组做什么

  • 使用游戏本身「据点帕鲁可不可以做」的设置,把野外树木和野外石头、矿石、骨头堆关掉。
  • 据点帕鲁就只会去你盖的设施(伐木场、采石场、矿场等)伐木、挖矿。
  • 玩家自己还是可以手动砍、手动敲。
  • 陨石默认维持原版(陨石过一段时间会消失,通常还是让帕鲁去挖比较划算)。
  • 只改内存,不会写进存档;移除模组就完全恢复原版。

需求

  • UE4SS(Palworld 版,Okaetsu 的 RE-UE4SS)

安装

  1. 在服务器文件夹(例如 steamapps\common\PalServer,或多人房房主的游戏文件夹)安装 UE4SS。
  2. 把这个 zip 解压到同一个文件夹(里面已经有完整的 Pal\Binaries\Win64\ue4ss\Mods\NoWildWork 路径)。
  3. 启动(或重开)服务器。

设置

修改 Pal\Binaries\Win64\ue4ss\Mods\NoWildWork\Scripts\config.lua,保存后重开服务器。

  • Trees(默认 true)- 据点帕鲁不砍野外树木、野外木头。
  • Rocks(默认 true)- 据点帕鲁不敲野外石头、矿石、骨头堆。
  • Meteors(默认 false)- 改成 true 就连陨石也不挖。
  • LogWildAssignments(默认 false)- 据点帕鲁还是被派去野外工作时写进日志文件(调试用)。

注意

  • 如果你需要据点帕鲁去挖据点范围内的野外矿点、石头(例如据点盖在矿区上),这个模组不适合你:可以把 Rocks 改成 false 只保留不砍树,或者不要安装。
  • 附带好处:据点周围的野外树木、石头不会被打掉,可以保留原本的造景。
  • 截图说明:(1)测试据点只有一座采伐场,只开放一只帕鲁做伐木、手工、搬运;它在采伐场工作,旁边的野外树木都没被砍。(2)据点盖在野外矿区上、没有采石场,只开放一只帕鲁挖矿;它待着不动,野外矿点都没被挖。
  • 只装在服务器(或多人房的房主、单人游戏),玩家不用装。
  • 设置会套用到服务器上所有据点。

繁體中文

據點帕魯不打野外樹木、石頭

據點帕魯不再跑去砍據點範圍內的野外樹木、敲野外石頭,改去你蓋的伐木場、採石場工作。樹木、石頭、隕石可以分別設定。

**類型:**伺服器端(裝在專用伺服器或多人房的房主;玩家不用裝)

問題

遊戲的工作優先順序裡,野外砍樹、挖礦排在設施伐木、挖礦前面。據點帕魯每次重新挑工作(吃完飯、休息完、泡完溫泉),就會跑去打據點範圍內的野外樹木或石頭,而不是去你蓋的設施,還常常因此卡在地形裡。

這個模組做什麼

  • 使用遊戲本身「據點帕魯可不可以做」的設定,把野外樹木和野外石頭、礦石、骨頭堆關掉。
  • 據點帕魯就只會去你蓋的設施(伐木場、採石場、礦場等)伐木、挖礦。
  • 玩家自己還是可以手動砍、手動敲。
  • 隕石預設維持原版(隕石過一段時間會消失,通常還是讓帕魯去挖比較划算)。
  • 只改記憶體,不會寫進存檔;移除模組就完全恢復原版。

需求

  • UE4SS(Palworld 版,Okaetsu 的 RE-UE4SS)

安裝

  1. 在伺服器資料夾(例如 steamapps\common\PalServer,或多人房房主的遊戲資料夾)安裝 UE4SS。
  2. 把這個 zip 解壓到同一個資料夾(裡面已經有完整的 Pal\Binaries\Win64\ue4ss\Mods\NoWildWork 路徑)。
  3. 啟動(或重開)伺服器。

設定

修改 Pal\Binaries\Win64\ue4ss\Mods\NoWildWork\Scripts\config.lua,存檔後重開伺服器。

  • Trees(預設 true)- 據點帕魯不砍野外樹木、野外木頭。
  • Rocks(預設 true)- 據點帕魯不敲野外石頭、礦石、骨頭堆。
  • Meteors(預設 false)- 改成 true 就連隕石也不挖。
  • LogWildAssignments(預設 false)- 據點帕魯還是被派去野外工作時寫進紀錄檔(除錯用)。

注意

  • 如果你需要據點帕魯去挖據點範圍內的野外礦點、石頭(例如據點蓋在礦區上),這個模組不適合你:可以把 Rocks 改成 false 只保留不砍樹,或者不要安裝。
  • 附帶好處:據點周圍的野外樹木、石頭不會被打掉,可以保留原本的造景。
  • 截圖說明:(1)測試據點只有一座採伐場,只開放一隻帕魯做伐木、手工、搬運;牠在採伐場工作,旁邊的野外樹木都沒被砍。(2)據點蓋在野外礦區上、沒有採石場,只開放一隻帕魯挖礦;牠待著不動,野外礦點都沒被挖。
  • 只裝在伺服器(或多人房的房主、單人遊戲),玩家不用裝。
  • 設定會套用到伺服器上所有據點。